Pay in installments of $6.22 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 25 - Jul 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
goggles night ATN PS31-3 NIGHT VISION GOGGLES – Tactical Elite L.L.CThe PS 31 Binocular Night Vision Device (BNVD) is a compact, lightweight, dual tube goggle to replace the legacy PS 15. Working directly with U. S. Operators input, the PS 31 was designed to increase system resolution, significantly reduce head borne weight, improve system of center of gravity, provide additional operational utility, and improve overall operator situational awareness and adding a 50 deg FOV for maximum visibility in the field. These
The PS-31 Binocular Night Vision Device (BNVD) is a compact, lightweight, dual tube goggle to replace the legacy PS-15.
Working directly with U.S. Operators input, the PS-31 was designed to increase system resolution, significantly reduce head borne weight, improve system of center of gravity, provide additional operational utility, and improve overall operator situational awareness and adding a 50 deg FOV for maximum visibility in the field. These tubes are auto gain-capable, allowing the system to adjust the brightness of their image as situations on the ground dictate.
The PS-31 BNVD has independently pivoting tube housings that allow the operator to run the goggle in a binocular or monocular configuration. Using two tubes at once allows the eyes to create depth perception and increases the ease in maneuvering terrain and obstacles as well as operating devices such as control panels and door knobs. However, monocular configurations allow for ease in transitioning between various lighting conditions that often occur on the battlefield and cause operators to switch between night vision and weapon-mounted optics. Another benefit to the pivoting tube housings is the ability to mount the “flatten” goggle against the front helmet surface when stowed. The ability to pivot the tube housings against the helmet surface creates an overall lower profile, increasing operator safety and equipment life.
Key Features
- GEN 3 Image Intensifier Tube
- Dual Goggle/Binocular
- Hands-Free use
- Comfortable Flip-Up Headgear
- Lightweight, Compact
- Waterproof
- Dimensions: 4.5" x 7" x 3.5"/115 mm x 178 mm x 85 mm
- Weight:1.27 lbs / 0.58 kg
- Instruction Manual PDF
- Specification Sheet PDF
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 5
Wonderful
Color: Black, Number of Items: 2, Color: Black, Number of Items: 2
I.love them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 16, 2026
★★★★★ 1
Dont like them
Color: Black, Number of Items: 2
Too small
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026
★★★★★ 5
Very Nice!
Color: Black, Number of Items: 1
This end table is very well made and uses good quality hardware throughout. It is assembled using cam lock nuts, wooden dowels, and Allen head bolts, which I personally prefer over standard wood screws. Cam locks stay tight over time and do not slowly work themselves loose like screws can on furniture that gets regular use, so that was a big plus for me right away.
The table arrives fully disassembled. For someone comfortable with furniture assembly, it took just over an hour to put together. The instructions are clear, well laid out, and easy to follow. I would rate the overall assembly difficulty around a 2 to 3 out of 5. Most of the process is straightforward and logical. There is only one frustrating step where you need to tighten eight bolts with an Allen wrench in a very tight space near the bottom tray. There is not enough clearance to fully rotate the wrench, so tightening those bolts takes a lot longer than it should. Other than that one section, the rest of the build went smoothly.
Once assembled, the table feels very solid and sturdy with no wobble. The finish held up well during assembly and I did not experience any scratching or chipping, which tells me it is fairly durable. The design is sturdy enough that it works well as an everyday end table without feeling delicate.
Functionally, the built in charging station works great. The power cord and outlets are convenient, and the charging base is very handy for phones and other devices. My only minor complaint is that I wish the power cord routed through the bottom of the stand instead of exiting straight out the back of the middle tray. It is not a deal breaker, but a bottom exit would make cable management a bit cleaner.
Storage space on the shelves is somewhat limited due to the design, but there is still enough room to be functional. It works well for books, small baskets, remotes, or decorative items. Just do not expect oversized storage.
Overall, this is a high quality, well designed piece with solid hardware and a clean look. If this style fits your space, I would absolutely recommend it. I am very happy with mine and would buy it again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2026
★★★★★ 5
Beautiful end table that works well anywhere.
Color: Black, Number of Items: 1
The JUSTOGO end table immediately stands out thanks to its unique, modern design and practical features. Its rectangular shape makes it surprisingly versatile. You can position it to showcase the three open shelves for easy access and display, or use it as a narrower separation piece or traditional end table. That flexibility makes it adaptable to different rooms and layouts.
One of the most thoughtful design choices is the placement of the built-in USB ports and power outlets. Located on the middle shelf, they don’t crowd the tabletop and still remain easily accessible for charging devices. This keeps the top surface clean and fully usable while ensuring cords aren’t stretched too far.
The black finish is another plus. It’s neutral, clean-looking, and blends easily with a wide range of décor styles.
If there’s a downside, it’s the assembly process. The instructions could be clearer, and while the advertised setup time is 20 minutes, it realistically takes closer to 40. That said, assembly is a one-time task, and once it’s complete, you’re left with a sturdy, functional, and visually appealing piece of furniture. Overall, it’s a smart combination of style and utility.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 13, 2026
★★★★★ 5
Love This
Color: Black, Number of Items: 1
I love love love the charging station on this table. The modern and sophisticated decor is perfect for my home. I love that this style matches with several rooms in my home. I would definitely order another one so I can have a pair. This table was easy to assemble and put together. The table is strong and durable and easy to clean. This table is a beautiful and functional piece of furniture to add to any home. Excellent value for the money. A definite must-have for your home.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 1, 2026